Zino Aviation
Training courseUnder Quality Review

Boeing 737 Type Rating Preparation

Systems, automation, procedures and simulator readiness

Preparation for formal Boeing 737 type-rating training: aircraft systems, automation, normal and non-normal procedures, crew coordination and simulator readiness. Not a type-rating course; not Boeing- or regulator-approved.

24 lessons ~50h 0m Knowledge checks + final assessment

Under Quality Review

This course is currently undergoing quality review. Access will be available once the review and validation process is complete.

What you’ll be able to do

Master the core concepts of boeing 737 type rating preparation through guided AI tutoring, worked examples and scenario-based practice.

Introductory Video

Watch the introductory video before starting the course

Open on YouTube

A complete Boeing 737 sector from London Stansted (EGSS) to Dublin (EIDW), recorded in Microsoft Flight Simulator with the PMDG 737-700. Flown with a real-world Boeing 737 pilot following airline standard operating procedures, starting from cold and dark with ground power connected, through cockpit preparation, FMC initialization, pushback, start, taxi, takeoff, climb, cruise, descent planning, approach, landing, and shutdown.

MSFS | TUTORIAL: PMDG Boeing 737 with a Real World Pilot | Full Flight Lesson | Stansted to Dublin• 2 h 39 min
Privacy-enhanced embed (youtube-nocookie.com)

Recommended flight orientation: Watch this sector once from start to finish before beginning Chapter 1. Strict video completion locking is not enforced to allow you to revisit individual flight phases as you progress through corresponding systems chapters.

Course Materials

Downloadable learner resources

Course workbooks and templates supplied for self-study. Download and use these materials alongside your lessons.

PDF281 KB

Self-Study Workbook: Memory Items, Limitations and Callouts (PDF)

Print-and-write workbook containing blank templates for memory items, limitations, and standard callouts. Complete it directly from your operator’s current FCOM, QRH, and SOP manuals.

DOCX723 KB

Self-Study Workbook: Memory Items, Limitations and Callouts (Word)

Digital editable Word document template for typing notes, flow patterns, and recall items. Contains no proprietary data — populated by the learner from controlled operator manuals.

Syllabus

Subjects & lessons

1. Boeing 737 Type Rating Preparation

Course chapters

24 lessons ~50h 0m Assessment (Review)
1

Chapter 1: The Type-Rating Journey

This chapter maps the journey you are about to make: what a type rating is and is not, how a typical approved training organisation (ATO) delivers it, which prerequisites must be in place before you start, and how competency-based training and assessment (CBTA) shapes what instructors look for. It ends by setting out what this preparation course is — and what it is not — so that every later chapter is read in the right frame. In the activity you will draft a personal preparation plan that you will return to in Chapter 24.

Under Review
2

Chapter 2: The Boeing 737 Family and Variant Awareness

This chapter gives you the family tree of the Boeing 737 — Original, Classic, Next Generation (NG) and MAX — and the regulatory logic that lets so many models share one type rating. You will learn the headline differences between the NG and the MAX that this course must respect, the facts about MCAS that matter for training, how differences training is graded and managed, and how to recognise information that is variant- or operator-specific and must therefore be confirmed in authorised documents. The chapter ends by explaining the Variant Check boxes used throughout the course.

Under Review
3

Chapter 3: Flight-Deck Orientation and Terminology

This chapter gives you a working map of the Boeing 737 flight deck before you meet it at your approved training organisation (ATO). You will learn the flight deck as a set of functional zones, see how the NG and MAX display architectures differ, understand how the 737 organises its caution and warning lights, and build the vocabulary — PF, PM, CM1, CM2, flows, checklists and the core abbreviations — that every later chapter uses. Systems detail comes later. The aim here is fluent orientation: knowing where to look, what a light's colour and position imply, and how to name exactly what you see.

Under Review
4

Chapter 4: Flight Controls and High-Lift Devices

This chapter explains how the 737 is controlled in roll, pitch and yaw, how it is trimmed, and how its high-lift devices and spoilers change the wing for take-off, approach and landing. It follows the system-explanation pattern used throughout the course: purpose, components, how it works, interactions, what the crew monitors and the indications, then a representative scenario. It also sets out, from FAA and official investigation sources, the flight-control differences between the NG and the MAX, including the MAX's speed trim system with the manoeuvring characteristics augmentation system (MCAS) and the design changes made before the MAX returned to service.

Under Review
5

Chapter 5: Flight Instruments, Displays and Air Data

This chapter follows air data and inertial data from the sensors on the fuselage to the displays in front of you and to the computers that fly, trim and warn. You will learn the 737's air data and inertial architecture, how the primary flight display (PFD) and navigation display (ND) present information, how the NG and MAX display systems differ, and where standby information comes from. Above all, you will learn how the system tells you when data is invalid or when the two sides disagree — and why the most dangerous failures are the ones that are not flagged at all.

Under Review
6

Chapter 6: Autoflight: AFDS, Autothrottle, MCP and the FMA

This chapter explains the Boeing 737 autoflight system as a crew tool. You will meet the autopilot flight director system (AFDS) with its two flight control computers (FCCs), the autothrottle (A/T), the mode control panel (MCP) through which you make requests, and the flight mode annunciation (FMA) through which the aeroplane reports what it is actually doing. The chapter then builds the habits that type-rating instructors assess most closely: reading, announcing and verifying every FMA change; predicting the next transition; choosing an appropriate level of automation; and recovering quickly from an automation surprise. Chapter 7 continues with the flight management computer (FMC) that supplies LNAV and VNAV guidance, and Chapter 22 applies these skills to approaches and go-arounds.

Under Review
7

Chapter 7: Flight Management and Navigation

This chapter explains the flight management computer (FMC) and its control display units (CDUs) as the source of the route, the vertical profile and the speeds that the autoflight system of Chapter 6 flies in LNAV and VNAV. It covers the inertial reference system (IRS) and why the position entered at alignment matters, how the FMC builds its best estimate of position from the IRS, the global positioning system (GPS) and radio updating, and how area navigation (RNAV) and required navigation performance (RNP) set accuracy, monitoring and alerting requirements. Initialisation is treated as a sequence of concepts — identity, position, route, performance — rather than keystrokes, and the chapter closes with the gross-error checks and cross-checking discipline that catch the errors people actually make.

Under Review
8

Chapter 8: Alerting and Warning Systems

This chapter explains how the 737 alerts its crew: the hierarchy of warnings, cautions and advisories; the master caution system; and the principal warning functions — take-off configuration, cabin altitude, overspeed, stall warning, ground proximity and terrain warning, traffic collision avoidance and windshear alerting. Each function is treated at principle level: what it monitors, what it tells you and what kind of response it demands. The chapter closes with how alerts interact, why several simultaneous alerts are hard to manage, and the identify–announce–refer model you will practise in this course. No procedure, memory item or trigger value is taught here; those live in your QRH and FCOM.

Under Review
9

Chapter 9: Electrical Power

This chapter explains how the 737 NG and MAX generate, distribute and protect electrical power. It is written at the level you need to arrive at ground school able to reason about the system rather than recite it: what the sources are, how the buses are arranged, why the aircraft never parallels its generators, how it keeps both sides powered when a generator is lost, and what the standby system will and will not do for you. It closes with the indications the crew monitors and a structured way to think through an electrical non-normal without inventing procedure.

Under Review
10

Chapter 10: Hydraulic Power

This chapter explains how the 737 NG and MAX generate and distribute hydraulic power: two main systems, A and B, each with an engine-driven pump and an electric pump, and a smaller standby system with its own electric pump. You will learn which functions each system powers, how the power transfer unit and the landing gear transfer unit make up for the loss of an engine-driven pump, and how the hydraulic systems depend on the electrical, pneumatic and fuel systems. The chapter connects back to flight controls (Chapter 4) and electrical power (Chapter 9) and forward to landing gear, brakes and steering (Chapter 16). It ends by building one habit: tracing any hydraulic user back to its system, its pump and whatever powers that pump.

Under Review
11

Chapter 11: Pneumatics, Air Conditioning and Pressurisation

This chapter follows the air. It explains where the 737 NG and MAX take bleed air from, how the pneumatic manifold distributes it, how the two air-conditioning packs turn it into cabin air, and how the pressurisation system decides how much of that air is allowed to leave. It then turns to what the crew monitors — the indications that tell you early whether the aircraft is pressurising — and to hypoxia, the physiological reason all of this matters. The Helios Airways flight 522 accident, and two more recent 737 events with the same pattern, anchor the chapter in a real problem: a serviceable system defeated by a configuration error and an ambiguous alert.

Under Review
12

Chapter 12: Fuel

This chapter explains how the 737 NG and MAX store fuel and deliver it to the engines and the APU: three tanks, two AC boost pumps in each, a crossfeed valve, engine and spar shutoff valves, a centre-tank scavenge function and the suction-feed back-up. You will learn why centre-tank fuel is used first and why its pumps are protected against running dry, how the fuel system depends on electrical power and supports hydraulic cooling, and how to read quantity, imbalance, pressure and valve indications at principle level. A published investigation report anchors the chapter's central lesson: distinguish an imbalance from a leak by evidence and by the checklist, never by assumption.

Under Review
13

Chapter 13: Powerplant and APU

This chapter explains the 737 NG and MAX engines — the CFM56-7B and the LEAP-1B — as twin-spool, high-bypass turbofans controlled by a full authority digital engine control. It covers how thrust is managed, how an engine is started, how the thrust reversers work and how the auxiliary power unit supplies both air and electricity. It then turns to engine indications and the skill the type rating tests hardest: reading the engine as a set of parameters, identifying a failed engine correctly and confirming it with your colleague before acting. The Kegworth and Southwest 1380 accidents anchor that skill.

Under Review
14

Chapter 14: Fire and Overheat Protection

This chapter explains how the 737 NG and MAX detect fire, smoke and overheat in the engines, APU, main wheel well, cargo compartments, lavatories and bleed ducts; how the crew is warned; and how the engines, APU and cargo compartments are protected by fixed extinguishing systems. It explains what the fire switch isolates, what a fire or overheat test proves and does not prove, and an identify–confirm–refer structure for any fire or overheat warning, with every action left to the QRH.

Under Review
15

Chapter 15: Ice and Rain Protection

This chapter explains how the 737 NG and MAX keep ice off the places where it would do most harm — the wing leading-edge slats, the engine inlet cowls, the air data probes and the flight-deck windows — and how wipers and windscreen coatings deal with rain. It explains the difference between anti-icing and de-icing, how bleed-air anti-ice draws on the engines and affects thrust and performance, and why the decision to use anti-ice is made against the operator's definition of icing conditions rather than on seeing ice. The Air Florida flight 90 accident shows how ice on a single probe can corrupt a thrust indication, and how cross-checking and clear communication protect the crew.

Under Review
16

Chapter 16: Landing Gear, Brakes and Steering

This chapter explains how the 737 NG and MAX extend and retract the landing gear, how the gear can be extended without hydraulic power, where brake pressure comes from, how antiskid and the autobrake system work at principle level, and how the nosewheel is steered. Throughout, it follows the hydraulic power: system A normally moves the gear and steers the nosewheel; system B normally powers the brakes and autobrakes; a brake accumulator, alternate sources and mechanical back-ups fill the gaps. It builds directly on Chapter 10 and connects to flight controls (Chapter 4), configuration warnings (Chapter 8) and thrust reversers (Chapter 13).

Under Review
17

Chapter 17: Performance, Weight and Balance and Configuration Awareness

This chapter treats performance and weight and balance as a chain of reasoning that ends in the aeroplane's configuration. It defines the take-off speeds from the regulations, explains what goes into a take-off performance calculation and how derated and reduced (assumed temperature) thrust differ, follows the load sheet from zero fuel weight (ZFW) and centre of gravity (CG) into flight management computer (FMC) entries, speeds, thrust and stabiliser trim, and places the take-off configuration warning where it belongs — as a last line of defence. It closes with flap and speed schedules, landing distance concepts and the cross-checks that stop one wrong number travelling the whole chain. Every value you will use comes from operator data; this chapter gives none.

Under Review
18

Chapter 18: Normal Operations: SOPs, Flows, Checklists, Callouts and Communication

This chapter explains the operating philosophy that turns two individually competent pilots into one crew: standard operating procedures (SOPs), the flow-then-verify pattern of normal procedures, checklist discipline, the division of duties between the pilot flying (PF) and the pilot monitoring (PM), standard callouts and flight mode annunciation (FMA) verbalisation, briefings, the sterile flight deck, and radiotelephony discipline with air traffic control (ATC). It teaches the philosophy and the reasons behind it from public regulatory and research sources. It does not teach any operator's flows, checklist items or callout wording: those come from the operator's flight crew operating manual (FCOM) and operations manual and are taught by your approved training organisation (ATO).

Under Review
19

Chapter 19: Non-Normal Operations: QRH Philosophy and Structured Decision-Making

This chapter explains, in principle, how a two-pilot crew manages a non-normal situation on the 737: what the quick reference handbook (QRH) and its non-normal checklists are designed to do and what they cannot do; the recall-item and reference-item concept; why aircraft control comes first; how to tell a time-critical situation from one that allows deliberate analysis; and how structured decision models such as T-DODAR and FOR-DEC help a crew decide well under pressure. It contains no memory items and no checklist steps for any condition. Every aircraft-specific action belongs to the operator's QRH and flight crew operating manual (FCOM), taught by your approved training organisation (ATO) and, in this course, supplied only by the instructor.

Under Review
20

Chapter 20: Human Performance, CRM and Threat and Error Management

This chapter gives you the human-performance toolkit the rest of the course has been using: crew resource management (CRM), the threat and error management (TEM) model, error types, situation awareness, attention and workload, automation-related risks, startle and surprise, fatigue, and the communication skills needed to speak up and intervene. It ends by turning TEM into a debriefing language you will use after every simulator session of your type rating.

Under Review
21

Chapter 21: The Simulator as a Learning Environment

This chapter prepares you to learn well in any simulator. It sets out the main categories of flight simulation training device used by ICAO, EASA and the FAA, explains what Zino's own Boeing 737 simulator is and is not, and presents the Simulator Configuration Verification Record that the instructor completes before the device is used. It then covers the behaviours that make simulator time productive — preparation, chair-flying, briefing, deliberate practice and structured debriefing — and the risk of negative transfer from unrepresentative devices.

Under Review
22

Chapter 22: Instrument Flying and Representative Approaches

This chapter turns the systems and automation knowledge of Chapters 5 to 7 into flight path management on instruments. It covers the instrument scan and the monitoring loop shared by the pilot flying (PF) and pilot monitoring (PM), energy management, the concepts behind instrument landing system (ILS) and required navigation performance (RNP) approaches, the stabilised approach and its gates, and the go-around — a manoeuvre that is simple on paper and demanding in practice. It gives no aircraft-specific procedure steps; those come from your operator's flight crew operations manual (FCOM) and standard operating procedures (SOP).

Under Review
23

Chapter 23: Integrated Scenarios

Each scenario is built only from what earlier chapters teach at architecture level, and each requires you to connect at least two systems with crew resource management (CRM) and threat and error management (TEM). Section 23.1 teaches a seven-step method for working any integrated scenario and Section 23.2 explains how the scenarios are facilitated. The flagship scenario applies the method in full; eight further scenarios follow, each with its situation, the chapters it draws on, guiding questions and a description of what good reasoning looks like. None contains an aircraft-specific action list: wherever the quick reference handbook (QRH) or flight crew operating manual (FCOM) would govern, the scenario says so, and in facilitated sessions only the instructor supplies an action, from the operator's current documents.

Under Review
24

Chapter 24: Readiness Review and Your Individual Development Plan

This final chapter turns the whole course into two products: a readiness decision and an individual development plan (IDP). You will see how the course judges readiness from three kinds of evidence, assess yourself against the nine pilot competencies on the course's four-level scale, and build an IDP using the five-step cycle in Figure 24.1 — Assess, Prioritise, Plan actions, Practise, Review with mentor. The chapter then looks forward: what to take to the ATO, how to study during an intensive type rating, how to look after sleep and wellbeing, and how Zino Aviation follows up after you leave.

Under Review

Assessment

Each lesson ends with a knowledge check. Every subject finishes with its own final assessment of multiple-choice and scenario-based questions, with full rationales and a 70% pass mark.

Source-grounded

All tutoring is grounded in Zino Aviation’s own Boeing 737 Type Rating Preparation material — the AI tutor won’t invent regulations or figures that aren’t in your source.